Find the water distribution accessories you need to complete your climate control or heating and cooling system installation here.
Electric Condensate Evaporator
This electric condensate evaporator is designed for use with all enclosure cooling units and air/water heat exchangers. It mounts on the outside of the enclosure and comes ready to connect.
Condensate Collecting Bottle
This condensate collection bottle is designed for use with all enclosure cooling units and air/water heat exchangers. It mounts on the outside of the enclosure and comes with a bottle holder and mounting hardware. It holds roughly ¾ liter of condensate; it provides a safety overflow on the side.
This transparent PVC hose is available in 5 m and 10 m lengths for discharging and transporting condensate. Designed for connection to cooling units and air/water heat exchangers.
Connection Set for Air/Water Heat Exchangers
Designed to allow professionals to lay out water connections and for regulation of volumetric flow.
Flow Regulator Valve
These brass valves are used for hydraulic balancing for air/water heat exchangers, especially if multiple heat exchangers are used in the water cooling circuit. The valve ensures the same quantity of cooling medium is distributed to all equipment.
Fitting G ⅜”
This G 3/8-inch internal threaded adaptor can be used to create fixed piping on the air/water heat exchanger for both the inlet and return.
Cooling Medium for Chillers (Ready-Mixed)
Our ready-mixed cooling medium (available in either a 1:2 or 1:4 antifreeze/water mixture) protects chillers against frost, inhibits bacterial growth, and provides optimum corrosion protection.